Installing IXIASOFT TEXTML Server

This procedure describes how to install IXIASOFT TEXTML Server on Linux.

When you install TEXTML Server, you also create a TEXTML Server instance. The TEXTML Server instance is the service that runs the TEXTML Server software.

The name of the service will be as follows:

textml.<instance_name>

For example, if the instance name is ts01, the service name will be:

textml.ts01

And the command to start TEXTML Server will be:

service textml.ts01 start

This procedure assumes that the .bin installation file was copied to the Linux machine, in the /tmp folder.

Note: You must perform this procedure as user root.

To install TEXTML Server:

Open a command-line interface to the Linux machine as user root, using a secure shell client such as PuTTY.
Run the following command to install bzip2, Perl and libxslt:
```
yum install bzip2 perl libxslt
```
Navigate to the /tmp folder and run the following command:
```
sh <installer_name>
```
For example:
```
sh setuptextmlserver-gcc4.8-Linux-x86_64-4.4.1.5167.bin
```
The following message is displayed:
```
Textmlserver installation
(I)nstallation (default) or files (E)xtract only? (I/e)
```
Press Enter to launch the installation.
The following message is displayed:
```
Installation files will be extracted in: /tmp/25005/
```
Note: The extraction location (tmp/25005 in the example above) is a temporary folder labeled with a random numerical string.
Wait while the files are extracted.
When the extraction is completed, the following prompt is displayed:
```
(F)ull Installation (default) or (C)ustomized Installation (F/c) 
```
For the IXIASOFT CCMS, you only need the following components:
- TEXTML Server
- Clients
- Administration Console
  Note: Install the console only if you have a graphic interface running on the Linux server; if you plan to access TEXTML Server from a console located on another machine, you do not need to install the Administration Console now.
Type C (for customized) and press Enter.
The following message is displayed:
```
Customized Installation...
Textmlserver Installation? (Y/n)
```
Press Enter.
The following message is displayed:
```
Samples files Installation? (Y/n) 
```
Type N to skip the Samples files Installation and press Enter.
The following message is displayed:
```
Clients Installation (Perl and Java)? (Y/n)
```
Press Enter.
The following message is displayed:
```
Administration Console Installation? (Y/n) 
```
Press Enter.
If the following message is displayed, press Enter:
```
Update the textml common libraries? (Y/n)
```
The following message is displayed:
```
Specify location for Ixiasoft folder (Default: /opt/ixiasoft)
```
Specify the location for IXIASOFT TEXTML Server, or press Enter to install to the default location.
The installation runs; messages similar to the following are displayed, depending on the components you are installing:
```
Textmlserver will be installed in: /opt/ixiasoft
                    Installing Textmlserver...
                    Installing libraries...
                    Installing clients (Perl, Php, Java)
                    Installing Administration Console...
                    
```
When the IXIASOFT TEXTML Server is installed, the following message is displayed:
```
Are you ready to configure your installation? (Y/n)
```

Press Enter.

The following message is displayed:

Do you want to (create/update/delete) a Textml Server instance? (create)

Do one of the following:
- If this is the first time that you are installing IXIASOFT TEXTML Server, or if you are updating an existing installation but want to create a new instance of TEXTML Server, press Enter.
- If you are updating an existing installation and want to use the same instance name, enter update and press Enter.
The following message is displayed:
```
What is the path that will contain all TextmlServer instances?
 [/opt/ixiasoft/textmlserver]
```
Press Enter to accept the default path.
If this directory does not exist, a message similar to the following is displayed:
```
The path "/opt/ixiasoft/textmlserver" does not exist currently. This
program is going to create it, including needed parent directories. Is this
what you want? [yes]
```
Press Enter to accept.
A message similar to the following is then displayed:
```
The list of instances of Textml Server:
  (none)
End of the list

What is the name of the instance? [default]
```
Note:
If TEXTML Server instances are already installed on the server, they are listed; for example:
```
The list of instances of Textml Server:
  ts01
  ts02
End of the list
```
Enter the name of the TEXTML Server instance to create or update and press Enter.
The following message is displayed:
```
What user ID to use? [textml]
```
This is the name of the user that will run the TEXTML Server instance. (When you create a docbase, you will need to give write permissions on the docbase folder to this username.)
You can specify an existing user; if you specify a user that does not exist, the installation procedure will create it.
To accept textml as the username (recommended), press Enter.
Do one of the following:
- If you are updating an existing installation, you see the following message and you have completed this procedure.
```
Done.
```
- If you are creating a new instance, the following message is displayed:
```
Do you want to install textmlserver as a service? [yes]
```
To configure the TEXTML Server component so that it starts automatically when the TEXTML Server service is started, press Enter.
The installation program confirms that the TEXTML Server configuration is complete:
```
Done.
```
The following message is displayed:
```
Configuring Clients.… 
Which action do you want (install/delete) the Client APIs? [install] 
```

Press Enter.

The following message is displayed:

What is the path that will contain all Client APIs? 
[/opt/ixiasoft/clients]

To accept the default path, press Enter.
If this directory does not exist, a message similar to the following is displayed:
```
The path "/opt/ixiasoft/clients" does not exist currently. This
program is going to create it, including needed parent directories. Is this
what you want? [yes]
```
Press Enter to accept. The installation program confirms that the configuration is complete:
```
Done.
```